| View previous topic :: View next topic |
| Author |
Message |
SPLITCAM SUPPORT
Site Admin
Joined: 16 Jul 2005
Posts: 524
|
 Posted: Mon Feb 27, 2006 9:03 am Post subject: RESOLVED PROBLEM with error 0x80004005 and BLACK SCREEN |
 |
|
For all who had problems with a black screen or with error 0x80004005 we released a new version SplitCam 3.27 Beta, we hope this will solve the errors, please don't hesitate to write us a message about the software problems you have and please let us know in this topic if the new version solved the problem !?
DOWNLOAD LINK for SPLITCAM 3.27
http://splitcamera.com/lote/beta/scnow.exe
_________________
SplitCam Support
http://www.splitcamera.com |
|
| Back to top |
|
ANKOR
User
Joined: 17 Feb 2006
Posts: 2
|
| Posted: Wed Mar 01, 2006 9:54 pm Post subject: |
|
|
Hello,
Thank you, for the fix with the 3.27 beta, it has solved the problem and I am able to capture video in splitcam using my winnov 1000 capture card. I was talking with winnov on this issue also, but they were unable to figure out the problem.
I have another issue now, when I try to open "video config" in splitcam to adjust color settings, splitcam freezes and I get the standard "microsoft" dont send error message and splitcam closes. I know the 3.27 is beta and hopfully this is just somthing that will be worked out.
For now I am able to open winnov's capture video and adjust colors settings that way, then just close and open splitcam to use for my other apps.
I really appreciate you guys fixing the error 0x80004005
Thank you |
|
| Back to top |
|
TJ1
User
Joined: 09 Mar 2006
Posts: 2
|
| Posted: Thu Mar 09, 2006 12:36 am Post subject: |
|
|
I was seeing a similar problem with v3.26, using the STMicroelectronics WDM drivers (dated 2002) for a l'espion digital camera (the very small pocket cam).
Updated to the v3.27 beta and now, instead of the black-screen and related error dialog, we now see:
"SetDevice: RenderStream() failed with error cide 0x80070057"
I should add that the camera/drivers work fine with amcap.exe.
This seems to be related to the auto-configuration of image dimensions that SplitCam now does, as the older version that allowed manual selection worked fine with this camera and driver set.
Also, I've noticed that SC lists both the WDM and VfW device names. Where a device provides both, then SC lists that device twice as a source, but so far my experience is that trying to use the Vfw drivers causes SC to freeze/crash.
Can I suggest that where a device is listed twice because it has WDM and VfW drivers, you add "(WDM)" or "(VfW)" to the name to help in choosing the correct driver? |
|
| Back to top |
|
dark
User
Joined: 12 Mar 2006
Posts: 1
|
| Posted: Sun Mar 12, 2006 2:12 pm Post subject: |
|
|
with .26 i was getting the 0x80004005 error.
after installing .27beta my pc gets restarted after trying to select my camera from splitcam interface.
my webcam works with other software (webcamXP)
my configuration:
windows xp sp2 eng
creative webcam II
do you have any resolution of this problem? |
|
| Back to top |
|
TJ1
User
Joined: 09 Mar 2006
Posts: 2
|
| Posted: Mon Mar 13, 2006 8:20 pm Post subject: |
|
|
With the beta I'm seeing a lot of GPF's on XP Pro SP2 when an application taking a feed from SplitCamera is temporarily busy, or disconnects/connects from the WDM driver.
It doesn't happen every time, but usually the first time or two Splitcam is run these kind of crashes will happen, then it 'settles down'. |
|
| Back to top |
|
dwrbudr
User
Joined: 14 Apr 2006
Posts: 2
|
| Posted: Fri Apr 14, 2006 5:30 pm Post subject: |
|
|
I get an access violation (probably) - The instruction at "0x00414cac" referenced memory at "0x00000000". The memory could not be "read".
I get this when clicking on main menu - File - Video config... I'm using Softcam 1.52 |
|
| Back to top |
|
Xenophan
User
Joined: 08 May 2006
Posts: 3
|
| Posted: Mon May 08, 2006 7:59 pm Post subject: |
|
|
I download and install version 3.27 but i have still same thing with my webcam
"SetDevice: RenderStream() failed with error cide 0x80040217"
i've Got service pack 2 and intel web cam...
_________________
lol |
|
| Back to top |
|
Xenophan
User
Joined: 08 May 2006
Posts: 3
|
| Posted: Wed May 10, 2006 11:26 am Post subject: |
|
|
No support for this ?
_________________
lol |
|
| Back to top |
|
mrky
User
Joined: 10 May 2006
Posts: 12
|
|
| Back to top |
|
vhartmann
User
Joined: 02 Jun 2006
Posts: 1
|
| Posted: Fri Jun 02, 2006 5:59 pm Post subject: |
|
|
Hello,
I get this error message: FAILED(hr=0x80040217) in m_pGraph->(pSourcePin, pGrabpin)
Plese tell me if there is a solution to this, i already tried the beta version and still the same.
Thanks |
|
| Back to top |
|
tommy
User
Joined: 01 Jul 2006
Posts: 1
|
| Posted: Sat Jul 01, 2006 6:55 pm Post subject: |
|
|
For all who using SplitCam and have problem with SetDevice:renderstream ....
It is very simple answer for this problem - in isn't same which program you start
first. For example: a have a digital camera and i want to use it as webcamera so as first a have to start software for camrera and there a choose Remote shooting. then I set on my camera photo/video out and connect it with my TV card by composite cable. But before I start TV tuner program [WinFast PVR]
I have to start SplitCam. and then everything other. And in a communcation program [ Skype] a set webcamera to SplitCam Capture. Everything run
so remember !!!! IT ISN'T SAME WHICH PROGRAM YOU START FIRST !!!! |
|
| Back to top |
|
SPLITCAM SUPPORT
Site Admin
Joined: 16 Jul 2005
Posts: 524
|
|
| Back to top |
|
rossvanhorn
User
Joined: 25 Mar 2007
Posts: 1
|
| Posted: Sun Mar 25, 2007 1:02 am Post subject: |
|
|
I have the new version, but I still get this error when trying to open certain avi files (even though I can open them in winamp and I can open other avi files in that set, which have the same resolution, in splitcam):
FAILED(hr=0x80040217) in m_pGraph->Connect(pSourcePin, pGrabPin) |
|
| Back to top |
|
rola
User
Joined: 29 Dec 2007
Posts: 2
|
| Posted: Sat Dec 29, 2007 7:56 am Post subject: |
|
|
| rossvanhorn wrote: |
I have the new version, but I still get this error when trying to open certain avi files (even though I can open them in winamp and I can open other avi files in that set, which have the same resolution, in splitcam):
FAILED(hr=0x80040217) in m_pGraph->Connect(pSourcePin, pGrabPin) |
Are you sure you still have the problem?? |
|
| Back to top |
|
marcelo63
User
Joined: 03 Jan 2008
Posts: 1
|
| Posted: Fri Jan 04, 2008 1:52 am Post subject: |
|
|
[quote="rola"][quote="rossvanhorn"]
I have the new version, but I still get this error when trying to open certain avi files (even though I can open them in winamp and I can open other avi files in that set, which have the same resolution, in splitcam):
FAILED(hr=0x80040217) in m_pGraph->Connect(pSourcePin, pGrabPin)[/quote]
Are you sure you still have the problem??[/quote]
I do
same code with last version published
work great with DV camera and quickcam from logitech so to get any jpg picture
But when come to any video file supported i get this error
Any help? |
|
| Back to top |
|
|
